Car Digital Head UP Display GPS Speedometer Display Digital Projector Universal Car Speed Overspeed Alarm ZIQIAO C80
1) Driving time and mileage calculation and display
2) Easy Setup–Plug & Play- Power through vehicle cigarette lighter. No professional installation is required.
3) Compatible with all Cars & Trucks. Use GPS signal guided calculation. No wiring needed to the VSS (vehicle speed signal).
4) Display MPH or KM/h
5) Auto adjust brightness through sensor for Day & Night driving.
6) Vehicle driving speed display. Green color speed display, easy on your eye.
7) Over-speed Alarm setting.
8) Total mileage display after car stops.
9) Altitude display.
1 × GPS HUD speedometer
1 × USB cable
1 × Installation accessories
1 × User Manual
gps speedometer, digital speedometer alarm, head up display, car digital speedometer, gps projector
1.Set the over-speed alarm rate, the default alarm speed rate is 120 km /H.
A: Short press the “Enter” button one time, show 001.
B: Slide “up” or “down” key to adjust the alarm speed..
2.The driving speed calibration
A: Short press twice the “Enter” button, show 002
B: Slide “up” or “down” key to adjust the speed rate display, default rate is 665, the range is 650 to 669.
Altitude value calibration:
1.Short press the “Enter” button three times, show 003
2.Slide “up” or “down” key to adjust the Altitude value. The default value is 850. Each time you slide the key, the altitude will be increased by 5 meters or decreased by 5 meters. The setting range of calibration value is 750-950.
Short press the “Enter” button 4 times, and slide the “down” key when displaying 004 to restore the factory defaults and clear the total mileage.
Set the speed meter unit (KM or Mile):
Long press the “Enter” button, when the left side of the screen lights up “ML” means the speed is displayed in miles.
Long press the “Enter” button, when the left side of the screen lights up, “KM” means the speed is displayed in kilometers.
Screen display Settings：
Long press the “up” key, the screen only displays the driving speed.
Long press the “down” key, the screen shows the driving speed and the driving time, total mileage and the current altitude.
Single driving mileage: In the case of continuous power supply, the driving mileage is continuously accumulated. It will be cleared when power off.
Single driving time: In the case of continuous power supply, the driving time is continuously accumulated. Unit is minutes. It will be cleared when power off.
Total mileage: the total mileage will be flashing display when car stops, and data will be saved even power is cut off, the maximum total mileage display is 9999 kilometers, which will be automatically clear after reaching the maximum value.
Altitude: The altitude unit is meter, the altitude value deviation range is 20~100 meters.
GPS positioning time: 1 to 5 minutes in the open air (The bad weather will affect the positioning time).
There is no GPS signals indoors.
Speed deviation: Since the speed data comes from the GPS satellite, slight deviation is unavoidable.
Input voltage: DC 5V Input current: DC 50-120mA Power bank for power supply is supported.
Working temperature: -30 to 70 degree
Driving data deviation is around 2%
All driving data will be cleared when power off except the total mileage.